LIGHTING

80w Mains Dimmable LED Driver 80W DC LED DRIVER 24V IN IP66 DIMMABLE

BG 817 Nexus 1 gang 10mm square spacer Spacers provide greater clearance for installation wiring where shallow mounting boxes are used, an alternative to fitting a deeper box

BG 818 Nexus 2 gang 10mm rectangular spacer Spacers provide greater clearance for installation wiring where shallow mounting boxes are used, an alternative to fitting a deeper box

9W LED Under cabinet light 3000K 675lm, 75lm/W 220V 25,000hr Lifetime Supplied with 20cm Input cable & butt connector Dimensions Length: 885mm Height: 34mm Width: 22mm

90 DEG ANGLE FOR 12W LED TAPE CORNER CONNECTOR 24 VOLT Teucer LED strip connectors save both time and effort as they remove the need for soldering. Just cut your LED strip to the desired length and simply attach the clips for a safe, fast and easy install. These connectors can be used for extending strip lengths and are also useful for corner installations. It is possible to use the LED strip connectors on both IP20 and IP65 LED strips, however, if used on IP65 rated strips, the IP rating will be diminished (unless resealed to an IP65 rating).

90 DEG ANGLE FOR 4.8-9.6W LED TAPE CORNER CONNECTOR 24 VOLT Teucer LED strip connectors save both time and effort as they remove the need for soldering. Just cut your LED strip to the desired length and simply attach the clips for a safe, fast and easy install. These connectors can be used for extending strip lengths and are also useful for corner installations. It is possible to use the LED strip connectors on both IP20 and IP65 LED strips, however, if used on IP65 rated strips, the IP rating will be diminished (unless resealed to an IP65 rating).

9W INTERGRATED LED DOWNLIGHT WHITE COOL WHITE DIMMABLE 640 LUMEN 55DEG INTEGRAL CUT OUT 70MM

9W INTERGRATED LED DOWNLIGHT WHITE WARM WHITE DIMMABLE 640 LUMEN 55DEG INTEGRAL CUT OUT 70MM

9W LED IP65 GROUND LIGHT D.160MM H.85MM CUT OUT.138MM Outdoor Lighting

AL-1/1M SURFACE MOUNT SUITABLE FOR DIFFUSER SURFACE SHALLOW 1 METRE PROFILE WITH CLIPS SUITABLE FOR 4.8W/7.2W/9.6W 24V The AL-1 is a discreet profile with a shallow depth, making it ideal for use in surface mounted installations where the profile is not visible but light output is. This profile is ideal for use with lower wattage LED strips.

AL-1/2M SURFACE MOUNT SUITABLE FOR DIFFUSER SURFACE SHALLOW 2 METRE PROFILE WITH CLIPS The AL-1 is a discreet profile with a shallow depth, making it ideal for use in surface mounted installations where the profile is not visible but light output is. This profile is ideal for use with lower wattage LED strips.

AL-2/1M 1 METRE SUITABLE FOR DIFFUSER SURFACE MOUNTED;SINGLE ROW STRIP PROFILE DEEP SUITABLE FOR 4.8W/7.2W/9.6W 24V The Al-2 is a versatile profile which can be used with a multitude of our LED strips. The illumination distance can vary from a small to a wider distance as the profile can accommodate higher power LED strips.