LED STRIPS & PANELS

60w Mains Dimmable LED Driver 24V IN IP66 MINIMUM LOAD 10% DIMMABLE Size 178x61x24mm

60W DC LED DRIVER 24V IN IP67 NON DIMMABLE Teucer 60 watt LED driver is 24VDC and IP rated. All drivers include features such as short circuit, overload and thermal protection thus ensuring a safe installation and a durable product.

RGB 7.2 W/m LED Strip (IP65) 7.2W COLOUR CHANGING IP65 40 LEDS PER MTR CUT EVERY 100MM

80w Mains Dimmable LED Driver 80W DC LED DRIVER 24V IN IP66 DIMMABLE

90 DEG ANGLE FOR 12W LED TAPE CORNER CONNECTOR 24 VOLT Teucer LED strip connectors save both time and effort as they remove the need for soldering. Just cut your LED strip to the desired length and simply attach the clips for a safe, fast and easy install. These connectors can be used for extending strip lengths and are also useful for corner installations. It is possible to use the LED strip connectors on both IP20 and IP65 LED strips, however, if used on IP65 rated strips, the IP rating will be diminished (unless resealed to an IP65 rating).

90 DEG ANGLE FOR 4.8-9.6W LED TAPE CORNER CONNECTOR 24 VOLT Teucer LED strip connectors save both time and effort as they remove the need for soldering. Just cut your LED strip to the desired length and simply attach the clips for a safe, fast and easy install. These connectors can be used for extending strip lengths and are also useful for corner installations. It is possible to use the LED strip connectors on both IP20 and IP65 LED strips, however, if used on IP65 rated strips, the IP rating will be diminished (unless resealed to an IP65 rating).

AL-1/1M SURFACE MOUNT SUITABLE FOR DIFFUSER SURFACE SHALLOW 1 METRE PROFILE WITH CLIPS SUITABLE FOR 4.8W/7.2W/9.6W 24V The AL-1 is a discreet profile with a shallow depth, making it ideal for use in surface mounted installations where the profile is not visible but light output is. This profile is ideal for use with lower wattage LED strips.

AL-1/2M SURFACE MOUNT SUITABLE FOR DIFFUSER SURFACE SHALLOW 2 METRE PROFILE WITH CLIPS The AL-1 is a discreet profile with a shallow depth, making it ideal for use in surface mounted installations where the profile is not visible but light output is. This profile is ideal for use with lower wattage LED strips.

AL-2/1M 1 METRE SUITABLE FOR DIFFUSER SURFACE MOUNTED;SINGLE ROW STRIP PROFILE DEEP SUITABLE FOR 4.8W/7.2W/9.6W 24V The Al-2 is a versatile profile which can be used with a multitude of our LED strips. The illumination distance can vary from a small to a wider distance as the profile can accommodate higher power LED strips.

AL-2/2M 2 METRE SUITABLE FOR DIFFUSER SURFACE MOUNTED;SINGLE ROW STRIP PROFILE DEEP SUITABLE FOR 4.8W/7.2W/9.6W 24V The Al-2 is a versatile profile which can be used with a multitude of our LED strips. The illumination distance can vary from a small to a wider distance as the profile can accommodate higher power LED strips.

AL-2I/1M 1 METRE RECESSED INSET;SINGLE ROW STRIP PROFILE DEEP SUITABLE FOR 4.8W/7.2W/9.6W 24V The Al-2 is a versatile profile which can be used with a multitude of our LED strips. The illumination distance can vary from a small to a wider distance as the profile can accommodate higher power LED strips.

AL-2I/2M 2 METRE RECESSED INSET;SINGLE ROW STRIP PROFILE DEEP SUITABLE FOR 4.8W/7.2W/9.6W 24V The Al-2 is a versatile profile which can be used with a multitude of our LED strips. The illumination distance can vary from a small to a wider distance as the profile can accommodate higher power LED strips.